Structural Reliability Without the Weight Penalty.
Structural-Grade 6061/7075. CMM-Verified to Your Tolerances. Zero Internal Stress.
20 years supplying forged aluminum components to Aerospace, Marine, and Automotive OEMs globally. 6061-T6 and 7075-T6 with zero porosity. Full material certs, ultrasonic test reports, and CMM inspection data on every shipment.
- ✓Drawing review & DFM feedback within 24 hours
- ✓ISO 9001:2015 — full material traceability on every order
- ✓±0.01mm tolerance. Verified by CMM before shipment
- ✓Hard anodized (Type III) — salt-spray tested to 500 hours
The Industry Challenge
The Engineering Challenges We Solve.
In structural automation and aerospace brackets, internal stress and porosity are silent failure modes. These are the three specific challenges that drive Tier-1 procurement managers to replace inconsistent castings with structural-grade forged aluminum.
Porosity in Die-Cast Aluminum Structural Parts
Die-casting introduces micro-porosity in structural cross-sections. For aerospace brackets and marine hardware, porosity means fatigue failure under cyclic load. Forging eliminates it. Verified by ultrasonic testing.
Insufficient Strength-to-Weight Ratio
Machined billet wastes material and misses the grain flow benefit. Forged 6061-T6 delivers 30–40% higher fatigue strength at the same weight. No extra material cost.
Saltwater Corrosion in Marine Applications
6061-T6 with hard anodizing (Type III) resists saltwater corrosion for 10+ years. Marine hardware clients require salt spray test (ASTM B117) certification. We provide it with every shipment.
Our Promise
Our Engineering Promise.
Replace inconsistent castings with high-strength, structural-grade 6061/7075 forged aluminum. We solve the challenge of internal stress and weight optimization. Get the durability of steel with the weight advantages of aluminum—all CMM-verified to your exact tolerances.
Every aluminum part ships with material cert, heat treatment record, and dimensional inspection report.
Closed-die forging eliminates internal voids. Structural integrity verified by ultrasonic testing on critical sections. No gas pockets, no fatigue failure.
Forging aligns grain structure to part geometry. Result: 30–40% higher fatigue strength vs. machined billet. Verified by macro-etch test on first article.
Every first article measured on a Zeiss CMM. Critical bore, hole pattern, and sealing surface dimensions reported against your drawing. Inspection report ships with the parts.
Technical Specifications
| Material Grades | 6061-T6, 6082-T6, 7075-T6, 2024-T4, 5083-H111 |
| Weight Range | 0.05 kg – 30 kg per piece |
| Press Capacity | 500T – 2,500T closed-die hydraulic presses |
| Dimensional Tolerance | ±0.05mm standard; ±0.01mm on critical features (CMM-verified) |
| Surface Finish | As-forged, CNC-machined, anodized (Type II/III), powder-coated, chromate |
| Anodizing Thickness | Type II: 5–25μm. Type III Hard Anodize: 25–75μm |
| Certifications | ISO 9001:2015, ASTM B247, AMS 2770 (Heat Treatment) |
| MOQ | 300 pcs (prototype: 30 pcs) |
| Lead Time | New tooling: 25–35 days. Repeat orders: 15–20 days |
The Evidence
Parts We Have Made. 6 Industries. 1 Factory.
From flight-critical aerospace brackets to marine dock cleats and high-voltage cable lugs — every part below was forged in our facility, CNC-machined to tolerance, and shipped with full material certification.
Client History
10+ Years Supplying Forged Aluminum to Aerospace & Marine OEMs.
Our forged 6061-T6 aluminum cleats and structural brackets are specified for marine hardware applications where saltwater corrosion resistance is mandatory. Our 7075-T6 aerospace brackets are used in flight-critical assemblies where grain flow and tensile strength are verified against AMS 2770. Every shipment includes full material certs, ultrasonic test reports, and CMM inspection data.